[. . . ] Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. [. . . ] In deep bore holes the drill bit should be pulled out occasionally in order to remove the debris from the drillandhole. Loosen the handle grip by turning in direction (5), and tighten it at an easy to use position by turning thegripindirection(4). By turning the handle grip in direction (4), the depth gauge can be released and the depth adjusted. This tool features a live tool indicator TM () which illuminatesassoonasthetoolisconnectedtothepower supply. [. . . ] DECLARATIOnOFCOnFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: 98/37/EC, 2006/95/EC, 2004/08/EC, EN5504-, EN5504-2, EN6000-3-2, EN6000-3-3, EN60745-, EN607452-, EN62233 EID750RS Soundpressurelevel(K=3dB(A)) 84dB(A) Soundpowerlevel(K=3dB(A)) 95dB(A) Weightedrootmeansquareaccelerationvalue 6m/s2 Drillinginconcrete(k=. [. . . ]